PCTG Filament
Explore for wearable housings · gears and mechanisms
$24.99 / 1 kg · 1.75 mm
Stock confirmation required
AMS / AMS lite
4+ ≈ $21.99 / spool
3 colors - White
- Black
- Clear
AMS 2 Pro · Enclosed · 120 °C bed
Filament for the Bambu Lab H2D
The enclosed dual-nozzle machine, with a 350 °C hotend and a 120 °C bed. Nothing in our range comes close to those limits, so every material is a temperature question answered before you start.
FeederAMS 2 Pro
ChamberEnclosed
Max nozzle350 °C
Max bed120 °C
Feeds from AMS11 materials
External holder9 materials
Printer limits from Bambu Lab's published specification, read 2026-09-06. Material counts are derived from those limits, not from a list we keep by hand.
What we would put on it
All materials
ABS Filament
Explore for keycaps · mouse and peripheral shells
$17.99 / 1 kg · 1.75 mm
Stock confirmation required
AMS / AMS lite
4+ ≈ $15.83 / spool
2 colors - White
- Black
PETG Filament
Explore for planters and outdoor parts · mechanical brackets
$16.99 / 1 kg · 1.75 mm
Stock confirmation required
AMS / AMS lite
4+ ≈ $14.95 / spool
18 colors - White
- Grey
- Black
- Red
- Yellow
- Blue
PC Filament
Explore for tool handles · fan and motor housings
$29.99 / 1 kg · 1.75 mm
Stock confirmation required
AMS / AMS lite
4+ ≈ $26.39 / spool
2 colors - White
- Black
PLA+ Filament
Explore for phone stands and holders · toys that get dropped
$17.99 / 1 kg · 1.75 mm
Stock confirmation required
AMS / AMS lite
4+ ≈ $15.83 / spool
10 colors - White
- Grey
- Black
- Green
- Red
- Orange
PLA Filament
Explore for décor and figurines · rapid prototypes
$15.99 / 1 kg · 1.75 mm
Stock confirmation required
AMS / AMS lite
4+ ≈ $14.07 / spool
10 colors - White
- Grey
- Black
- Light Green
- Dark Red
- Orange
Does the spool fit?
| Dimension | FilamentBay 1 kg spool | AMS 2 Pro accepts | Fits |
|---|---|---|---|
| Width | 65 mm | 50–68 mm | Yes |
| Outer diameter | 200 mm | 197–202 mm | Yes |
| Hub (inner diameter) | 54 mm | Not published | Not published |
| Spool material | Plastic | Plastic recommended | Yes |
| Empty weight | 160 g | — | — |
Bambu Lab's wording: “Spool Dimension / Width: 50 mm-68 mm / Diameter: 197 mm-202 mm” Source. Where a figure is not published we say so rather than guess.
Every material, and where it goes
| Material | Nozzle | Bed | On the H2D | Why |
|---|---|---|---|---|
| ABA | 250–270 °C | 80–100 °C | External holder | Use the external spool holder. Feeder suitability is not established for this material. |
| ABS | 250–270 °C | 80–100 °C | AMS 2 Pro | Nozzle 250–270 °C, bed 80–100 °C. |
| ASA | 250–270 °C | 90–110 °C | AMS 2 Pro | Nozzle 250–270 °C, bed 90–110 °C. |
| CF | 260–280 °C | 100–110 °C | External holder | Use the external spool holder. Feeder suitability is not established for this material. |
| ESD | 260–280 °C | 100–110 °C | External holder | Use the external spool holder. Feeder suitability is not established for this material. |
| PETG Glitter | 240–260 °C | 60–70 °C | AMS 2 Pro | Nozzle 240–260 °C, bed 60–70 °C. |
| PLA Matte | 200–230 °C | 50–65 °C | AMS 2 Pro | Nozzle 200–230 °C, bed 50–65 °C. |
| PC | 260–280 °C | 100–110 °C | AMS 2 Pro | Nozzle 260–280 °C, bed 100–110 °C. |
| PCTG | 260–280 °C | 100–110 °C | AMS 2 Pro | Nozzle 260–280 °C, bed 100–110 °C. |
| PETG | 240–260 °C | 60–70 °C | AMS 2 Pro | Nozzle 240–260 °C, bed 60–70 °C. |
| PLA | 200–240 °C | 50–65 °C | AMS 2 Pro | Nozzle 200–240 °C, bed 50–65 °C. |
| PLA+ | 200–240 °C | 50–65 °C | AMS 2 Pro | Nozzle 200–240 °C, bed 50–65 °C. |
| PLA Silk | 200–230 °C | 50–65 °C | AMS 2 Pro | Nozzle 200–230 °C, bed 50–65 °C. |
| TPU 72D | 220–240 °C | 30–60 °C | External holder | Bambu advises against flexible material in the AMS 2 Pro. |
| TPU 85A | 220–240 °C | 30–60 °C | External holder | Bambu advises against flexible material in the AMS 2 Pro. |
| TPU 90A | 220–240 °C | 30–60 °C | External holder | Bambu advises against flexible material in the AMS 2 Pro. |
| TPU 95A | 220–240 °C | 30–60 °C | External holder | Bambu advises against flexible material in the AMS 2 Pro. |
| TPU 98A | 220–240 °C | 30–60 °C | External holder | Bambu advises against flexible material in the AMS 2 Pro. |
| PETG Transparent | 240–260 °C | 60–70 °C | AMS 2 Pro | Nozzle 240–260 °C, bed 60–70 °C. |
| PLA Wood | 200–230 °C | 50–65 °C | External holder | Use the external spool holder. Feeder suitability is not established for this material. |
On flexible material, Bambu Lab's own wording: “Avoid using AMS to print flexible materials, including TPU, TPE, or absorbent PVA, as they may get stuck inside the AMS feed tube during printing.” Source
Worth knowing before you order
- Dual nozzles make a rigid material plus flexible TPU a practical combination, with the TPU on the external holder.
- Composites wear nozzles and PTFE. Use hardened steel and check the feed path regularly.
- The AMS 2 Pro takes the same 50–68 mm × 197–202 mm spool as the original AMS.
Profiles, not guesswork
The settings hub identifies generated starting values, target machines and unsupported material mappings. A preset is not validation on this printer; review the target and calibrate temperature, flow and retraction before a production part.
Shipped from the US
Stock, destination charges and shipment timing are confirmed before payment. The published contiguous-US offer applies above $35; see the shipping policy for conditions. Unopened-spool returns use the 30-day policy. Any 4 spools take 12% off, mixed however you like.
Start a mixed orderBambu Lab H2D filament questions
Do FilamentBay spools fit the Bambu Lab H2D?
Yes. The H2D uses the AMS 2 Pro, which Bambu Lab publishes as taking spools 50–68 mm wide at 197–202 mm outer diameter. Our 1 kg spool measures 65 × 200 mm with a 54 mm hub, in injection-moulded plastic rather than cardboard.
Can I print flexible TPU on the H2D?
From the external spool holder, yes. For the full-size AMS Bambu Lab advises against flexible material in general, so all five of our TPU grades belong on the external holder on this machine, 72D included.
What is the hottest bed the H2D reaches?
120 °C, with a 350 °C nozzle, per Bambu Lab's published specification. Every material we make sits inside that window.
Does the H2D enclosure change what I can print?
Yes, and it is the main reason to own an enclosed machine. ABS and ABA need the chamber heat or large parts crack and lift as they cool. PC and PCTG benefit from it on wide flat parts.
Do you have Bambu Studio profiles?
See the settings hub for each material and format. Some files are starting presets with a different target machine, some are manual worksheets, and unconfirmed polymer mappings are withdrawn. No universal import or printer validation is claimed.
Do 3 kg and 5 kg spools work on the H2D?
Not in the AMS 2 Pro: they are wider and larger than the published window. Print them from an external holder, or re-spool onto an empty 1 kg spool.
Other Bambu Lab printers