Save 20% AMS
PLA Filament
$15.99$19.99
4+ spools $14.07
- White
- Grey
- Black
- Light Green
- Dark Red
- Orange
- Magenta
- Blue
- +2
Choose options
5 materials
PLA for every kind of print
Basic for speed and price, Plus for toughness, Silk and Matte for finish, Wood for texture. All five share the same 1.23 g/cm³ base resin and the same 55 °C drying recipe, so you can switch between them without re-tuning.
- Easy to print
- Low warp
- AMS ready
- FAQ
Save 22% AMS
PLA+ Filament
$17.99$22.99
4+ spools $15.83
- White
- Grey
- Black
- Green
- Red
- Orange
- Purple
- Blue
- +2
Choose options
Save 21% AMS
PLA Silk Filament
$18.99$23.99
4+ spools $16.71
- White
- Grey
- Pink
- Blue
- Gold
- Red
- Yellow
- Green
- +6
Choose options
Save 22% AMS
Save 19% AMS
No material matches those filters. Clear one and try again.
Related guides
All guides
PLA vs PETG vs PCTG: which one for the part in front of you
Side-by-side numbers from the same lab: strength, impact, heat deflection and printability for PLA, PLA+, PETG and PCTG.
5 min read
Drying filament: temperatures, times and when it is worth it
A per-material drying table from our lab, the symptoms of wet filament and how to store spools so you dry them less often.
4 min readPLA Filament FAQ
Which PLA should I start with?
Basic PLA. Move to PLA+ when parts crack, Matte when you want to hide layer lines, Silk for gloss and Wood for texture.
Will the spools work in a Bambu Lab AMS?
Yes for every rigid material: the 1 kg spool is 200 mm × 65 mm with a 54 mm hub, inside the AMS window. Flexible TPU 85A–98A must be printed from the external holder; 72D feeds normally.
Where are the TDS and slicer profiles?
Every product page has a downloads block with Bambu Studio, OrcaSlicer and PrusaSlicer profiles plus the technical data sheet. All profiles are also listed on the Profiles page.