Save 23% AMS
PETG Filament
$16.99$21.99
4+ spools $14.95
- White
- Grey
- Black
- Red
- Yellow
- Blue
- Green
- Purple
- +10
Choose options
3 materials
Tough parts, easy printing
PETG bridges PLA and ABS: no enclosure needed, far better outdoor and chemical resistance than PLA. Our three grades share the same base resin so settings carry over.
- Impact resistant
- Outdoor
- Chemical resistant
- FAQ
Save 21% AMS
PETG Transparent Filament
$18.99$23.99
4+ spools $16.71
- Clear
- Blue
- Green
- Red
- Yellow
- Orange
Choose options
Save 20% AMS
No material matches those filters. Clear one and try again.
Related guides
All guides
PLA vs PETG vs PCTG: which one for the part in front of you
Side-by-side numbers from the same lab: strength, impact, heat deflection and printability for PLA, PLA+, PETG and PCTG.
5 min read
Drying filament: temperatures, times and when it is worth it
A per-material drying table from our lab, the symptoms of wet filament and how to store spools so you dry them less often.
4 min readPETG Filament FAQ
PETG or PCTG?
PCTG is the upgrade: clearer, tougher and BPA-free, at a higher price and a 100 °C bed. PETG is the everyday functional material.
Will the spools work in a Bambu Lab AMS?
Yes for every rigid material: the 1 kg spool is 200 mm × 65 mm with a 54 mm hub, inside the AMS window. Flexible TPU 85A–98A must be printed from the external holder; 72D feeds normally.
Where are the TDS and slicer profiles?
Every product page has a downloads block with Bambu Studio, OrcaSlicer and PrusaSlicer profiles plus the technical data sheet. All profiles are also listed on the Profiles page.