# FilamentBay PLA+ Filament 1.75mm — PrusaSlicer filament config. Import via File > Import > Import Config.
# Nozzle 200–240 °C, bed 50–65 °C, drying 55 °C · 4 h.
filament_settings_id = "FilamentBay PLA+"
filament_vendor = FilamentBay
filament_type = PLA
filament_density = 1.23
filament_cost = 17.99
filament_diameter = 1.75
first_layer_temperature = 225
temperature = 220
first_layer_bed_temperature = 65
bed_temperature = 58
filament_max_volumetric_speed = 15
fan_always_on = 1
min_fan_speed = 60
max_fan_speed = 100
filament_retract_length = nil
filament_retract_speed = nil
filament_notes = "Max speed ≤ 300 mm/s. AMS compatible."