# GENERATED STARTING VALUES, revision 2026-09-08.1. Not printer-tested or import-validated. Target for Bambu/Orca: Bambu Lab X1 Carbon, 0.4 mm nozzle; Prusa: user-selected printer. No tested slicer version. PCTG JSON is manual-transfer only (no verified upstream base). Source: product catalog; preorder, provisional settings. Temperatures are range midpoints, not calibrated optima. Nozzle range 250–270 °C; bed range 90–110 °C. Drying: 55 °C · 4 h (unvalidated for this grade; check spool and dryer limits). AMS / AMS lite. Retraction, flow and cooling must be calibrated using your printer baseline. See https://filamentbay.com/pages/profiles/.
filament_settings_id = FilamentBay ASA starting values
filament_vendor = FilamentBay
filament_type = ASA
filament_diameter = 1.75
temperature = 260
first_layer_temperature = 260
bed_temperature = 100
first_layer_bed_temperature = 100
filament_notes = GENERATED STARTING VALUES, revision 2026-09-08.1. Not printer-tested or import-validated. Target for Bambu/Orca: Bambu Lab X1 Carbon, 0.4 mm nozzle; Prusa: user-selected printer. No tested slicer version. PCTG JSON is manual-transfer only (no verified upstream base). Source: product catalog; preorder, provisional settings. Temperatures are range midpoints, not calibrated optima. Nozzle range 250–270 °C; bed range 90–110 °C. Drying: 55 °C · 4 h (unvalidated for this grade; check spool and dryer limits). AMS / AMS lite. Retraction, flow and cooling must be calibrated using your printer baseline. See https://filamentbay.com/pages/profiles/.