{
  "type": "filament",
  "name": "FilamentBay ASA @bambu X1C 0.4 starting",
  "from": "User",
  "inherits": "Generic ASA",
  "version": "1.0.0.0",
  "instantiation": "true",
  "compatible_printers": [
    "Bambu Lab X1 Carbon 0.4 nozzle"
  ],
  "filament_vendor": [
    "FilamentBay"
  ],
  "filament_type": [
    "ASA"
  ],
  "nozzle_temperature": [
    "260"
  ],
  "nozzle_temperature_initial_layer": [
    "260"
  ],
  "hot_plate_temp": [
    "100"
  ],
  "hot_plate_temp_initial_layer": [
    "100"
  ],
  "textured_plate_temp": [
    "100"
  ],
  "textured_plate_temp_initial_layer": [
    "100"
  ],
  "filament_notes": [
    "GENERATED STARTING VALUES, revision 2026-09-08.1. Not printer-tested or import-validated. Target for Bambu/Orca: Bambu Lab X1 Carbon, 0.4 mm nozzle; Prusa: user-selected printer. No tested slicer version. PCTG JSON is manual-transfer only (no verified upstream base). Source: product catalog; preorder, provisional settings. Temperatures are range midpoints, not calibrated optima. Nozzle range 250–270 °C; bed range 90–110 °C. Drying: 55 °C · 4 h (unvalidated for this grade; check spool and dryer limits). AMS / AMS lite. Retraction, flow and cooling must be calibrated using your printer baseline. See https://filamentbay.com/pages/profiles/."
  ]
}