# FilamentBay ABA Filament 1.75mm — PrusaSlicer filament config. Import via File > Import > Import Config.
# Nozzle 250–270 °C, bed 80–100 °C, drying 55 °C · 4 h.
filament_settings_id = "FilamentBay ABA"
filament_vendor = FilamentBay
filament_type = ASA
filament_density = 1.02
filament_cost = 21.99
filament_diameter = 1.75
first_layer_temperature = 265
temperature = 260
first_layer_bed_temperature = 100
bed_temperature = 90
filament_max_volumetric_speed = 10
fan_always_on = 0
min_fan_speed = 0
max_fan_speed = 20
filament_retract_length = nil
filament_retract_speed = nil
filament_notes = "Max speed ≤ 300 mm/s. AMS compatible."